LG FRIDGE - Procedure to install; Preparing before installing the refrigerator

8
※ Reference
Door opened to the right
If the thickness of the cabinet material is
18mm, cut at A, but if it is 20mm, cut at B.
Door opened to the left
If the thickness of the cabinet material is
18mm, cut at D, but if it is 20mm, cut at C.
1) Fold the top cover of the refrigerator ¨ in
advance as shown at the figure.
1. Installing the top cover of the refrigerator
2) Fix the refrigerator top cover ¨ with the
wood bolting screw ⓑ (3 places) at a
point 45mm in from interior edge of
cabinet at each end and also in the
middle.
(The thickness of the cabinet material
determines the way the top cover
¨ is
cut. Please take notice of the below
"reference" for the correct cutting of the
top cover.)
6. Procedure to install
1) Preparing before installing the refrigerator
A CDB
45mm45mm
45mm
1
1
1
b