To Next PageTo Next PageWhy my LG FV1408H4V Washer/Dryer does not drain water?
If your LG Washer/Dryer isn't draining water, first ensure that the drain hose is not kinked. Also, make sure that the drain hose is not higher than 1.2 m above the bottom of the appliance.
Why my LG FV1408H4V is not connecting to the Wi-Fi network?
If your LG Washer/Dryer isn't connecting to Wi-Fi, the password for the Wi-Fi might be incorrect; find the Wi-Fi network connected to your smartphone and remove it, then register your appliance on LG ThinQ. Also, mobile data for your smartphone might be turned on; turn it off and register the appliance using the Wi-Fi network. The wireless network name (SSID) should be a combination of English letters and numbers. Finally, set the wireless router to 2.4 GHz and connect the appliance.
What to do if I have dry problem with my LG FV1408H4V Washer/Dryer?
If you are experiencing a drying issue with your LG Washer/Dryer, check the water supply tap. Also, do not overload the appliance and check that the washing machine is draining properly to extract adequate water from the load.
Why is the drying performance too low on my LG FV1408H4V Washer/Dryer?
To improve drying performance on your LG Washer/Dryer, ensure the water supply tap is open and that the drain filter is not clogged. Also, check the load capacity for the selected cycle to avoid overloading. Finally, select the highest spin speed allowed for the wash cycle.
How to fix OE WATER OUTLET ERROR in LG FV1408H4V Washer/Dryer?
To fix the OE WATER OUTLET ERROR on your LG Washer/Dryer, check the drain hose for kinks or clogs and straighten or clean it. Also, inspect and clean the drain filter, as a clogged filter can cause this error.
How to solve 1E INLET ERROR on LG Washer/Dryer?
To solve the 1E INLET ERROR on your LG Washer/Dryer, first check if the water supply is adequate by testing another tap in the house. Ensure the water supply tap is fully open and that the water supply hoses are not kinked; straighten them or reinstall the water inlet hose. Also, inspect and clean the filter of the inlet hose. If water leakage occurs in the aqua stop supply hose and the indicator is red, replace the aqua stop supply hose.
What to do if LG Washer/Dryer shows UE UNBALANCE ERROR?
If your LG Washer/Dryer displays a UE UNBALANCE ERROR, it could be due to the laundry being too wet or the load being too small. Rearrange the laundry to allow proper spinning, or add 1 or 2 similar items to help balance the load. After adjusting the load, close the door and press the Start/Pause button.
How to fix 1E inlet error on LG FV1408H4V Washer/Dryer?
If you're seeing a 1E INLET ERROR on your LG Washer/Dryer, it indicates a water supply issue. First, check another tap in the house to ensure adequate water supply to that location. Next, make sure the water supply tap is fully open. Also, inspect the water supply hoses for any kinks and straighten them or reinstall the water inlet hose. Finally, check and clean the filter of the inlet hose, as it may be clogged.
What to do if my LG FV1408H4V displays an OE WATER OUTLET ERROR?
If your LG Washer/Dryer is showing an OE WATER OUTLET ERROR, it means there's a problem with the water draining. Check the drain hose for any kinks or clogs, and clean and straighten it if necessary. Also, inspect the drain filter for clogs and clean it.
What to do if LG FV1408H4V Washer/Dryer is leaking water?
If your LG Washer/Dryer is leaking water, the issue might stem from clogged house drain pipes. Unclog the drain pipe, and contact a plumber if necessary. Alternatively, the leakage could be due to improper drain hose installation or a clogged drain hose. In this case, clean and straighten the drain hose, and regularly check and clean the drain filter.
General| Brand | LG |
|---|---|
| Model | FV1408H4V |
| Category | Washer/Dryer |
| Language | English |
