LG FX165DAB - Other Operations; Setting the Clock; Using Your Player as an Alarm Clock; Sleep Timer Setting

Operating48
Operating
4
Other Operations
Setting the Clock
1. Turn the unit on.
2. Press CLOCK for at least 2 seconds.
3. Choose time mode by pressing
C
/
V
.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4. Press SET to conrm your selection.
5. Select the hours by pressing
C
/
V
.
6. Press SET.
7. Select the minutes by pressing
C
/
V
.
8. Press SET.
Using your player as an alarm
clock
1. Turn the unit on.
2. Press TIMER. Each functions ashes.
3. Press SET when the function you want to be
woken by is showing.
4. “ON TIME” will be displayed. This is your desired
time to unit turns on. Press
C
/
V
to
change the hours and minutes and press SET to
save.
5. The “OFF TIME” will be displayed. This is your
desired time to unit turns o.
6. Press
C
/
V
to change the hours and
minutes and press SET to save.
7. Press
C
/
V
to change the volume and
press SET to save. The clock icon “
(
“ shows
that the alarm is set.
8. Press TIMER button 2 times. You can check the
setting status.
y
If you set the clock time, you can check the
time by pressing CLOCK even when the
player is turned o.
y
If you set the clock time and alarm, you
can check the alarm icon “
(
“ by pressing
CLOCK even when the player is turned o.
y
If you set the clock time and alarm, you
can check the alarm icon “
(
“ and setting
informaiton by pressing TIMER even when
the unit is turned o. Then this function will
working in everyday.
y
This function is operated according to
below condition.
-
Disc: Audio CD only
-
USB: Only MP3/WMA contained in the USB
storage device.
-
The other le or disc : This function will be
operated to the TUNER.
,
Note
Sleep Timer Setting
Press SLEEP one or more times to select delay time
between 10 and 180 minutes, after the unit will
turn o.
To check the remaining time, press SLEEP.
To cancel the sleep function, press SLEEP repeatedly
until “SLEEP 10” appears, and then press SLEEP once
again while “SLEEP 10” is displayed.
y
You can check the remaining time before
the Unit turns o.
y
Press SLEEP The remaining time appears in
the display window.
y
Sleep function will working after Dimmer.
,
Note