Feature Highlight
18
The device may generate static electricity if the surrounding air is dry. If
the surrounding air is dry, avoid scanning fingerprints, or touch a metallic
object such as coin or key before scanning fingerprints to remove static
electricity.
Registering fingerprints
You can register and save your fingerprint on the device to use fingerprint
identification.
1. Tap Home > Settings > Lock screen & security > Fingerprints.
NOTES • This feature is available only when the screen lock is set.
- Lock the device with a Knock Code, Pattern, PIN or Password.
• If the screen lock is not set, enable it by following the on-screen instructions. See
Setting a Screen Lock
for details.
2. Locate the fingerprint sensor on the back of the device and gently put
your finger on it to register the fingerprint.
NOTES • Gently press the fingerprint sensor so that the sensor can recognize your fingerprint.
• Ensure that your fingertip covers the entire surface of the sensor.
3. Follow the on-screen instructions.
Repeat scanning the fingerprint by moving your finger little by little
until the fingerprint is registered.
4. When the fingerprint registration is done, tap OK.
Tap ADD MORE to register another fingerprint. If you register only one
fingerprint and the corresponding finger is not in a good condition, the
fingerprint recognition may not work well. As a preventative measure,
register multiple fingerprints.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
