26
OPERATION
Icemaker
Before Using the Icemaker
• Fill with potable water only into icemaker or
dispenser water tank.
• The icemaker produces ice normally once
approximately 48 hours have passed after the
appliance is initially installed.
• If half-frozen ice is put into the ice storage bin, it
will cause the exiting ice cubes to lump together.
It takes about 4 hours at - 20 °C for ice
production.
• If the freezer door is frequently opened, warm
air enters the freezer compartment. It may take
a longer time to freeze ice.
• Be careful not to twist the ice maker with force
since it can break.
• Do not freeze the ice in the ice storage bin. This
could break it and cause appliance damage or
injury.
Using the Icemaker
*1 This feature is only available on some models.
Icemaker Type A
*1
1
Hold the handle of ice tray and pull it out.
2
Fill the ice tray with potable water up to the
water line.
3
Place the ice tray back to its position carefully.
4
Rotate the icemaker handle clockwisely.
5
Lift and remover the ice storage bin slightly.
Icemaker Type B
*1
1
Fill the ice tray with potable waterand place it in
the freezer compartment.
2
After the water is frozen, hold theice tray at its
ends and twist gently.
To Next Page
Loading...
