Is water supplied?
Are the plugs correctly connected to the terminals
of the INLET VALVE ASSEMBLY?
Is detergent/softener/bleach put in the correct
compartment of the DRAWER?
Is the detergent/softener/bleach CAP clogged?
Refer to page 22
IE ERROR
Check the wiring.
Put it in the correct
compartment
Clean the CAP and
DRAWER
DETERGENT/SOFTENER/BLEACH DOES NOT FLOW IN
ABNORMAL SOUND
Secure the bolt.
Replace the STATOR
ASSEMBLY or ROTOR
ASSEMBLY.
Is the motor bolt loose?
Is there friction noise coming from the motor?
To Next Page
Loading...
