LG GCWM1069CS7

41
Adjusting legs
Adjusting legs
Foreign objects beneath
the feet?
Do not place items under the feet to fill a gap between the foot of the unit and the floor. This
will not resolve the issue and may make it worse.
Drip pans can cause the unit to slip in the pan and the pan to slip on the floor.
Use rubber cup for reducing the gap and adjust legs for leveling.
Carpet
Paper
Purchased stopper
4620ER3001A(Black): for Tile floorsMJB41415401(Grey): for Wooden floors
Gap less than 10mm (4”)
Use rubber cup for reducing the gap and adjust legs for leveling
Drip Pan
An Vibraon Pad
Floor
No Gap
Washer
Vibraon -Condions Under Leg
Is the floor under the unit
clean and slipless?
Make sure the floor is clean and dry to prevent the unit from slipping on the floor.
An-skid pads beneath the feet of the unit will help provide a grip for the unit
and prevent slipping caused by smooth, slippery surfaces.
Clean and dry to prevent walking and vibrang.
Dust and oils make product walk and vibrate.
To prevent product walking,
Place the an-skid pads under both front feet
especially linoleum or le covering floor.
Rubber caps are also an effecve method of
prevenng product vibraon and walking.
If the pedestal is installed, place the an-skid pads
under both front feet of pedestal.
An-Skid Pad