- 103 -
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
5. Trouble shooting
5.16 Trouble shooting of Bluetooth
Bluetooth RF Test procedure
1. Set phone to bluetooth test-mode.
- Blue tooth ON : Enter Test Mode(1809#*910#) Æ Eng Mode Æ BT Testing Æ RF Test
2. Insert a phone in a TEMCELL (in case of radiation test)
3. Set ‘discover’ after push menu button of the tester and select the link analyzer .
4. After ‘set test mode’, confirm the connection state.
5. Measure the power of full channel after hopping mode is selected to ‘ON’
6. You can select wanted test cases after getting an optimized power
7. Blue tooth Off
- Menu(OK key)ÆsettingÆ4)ConnectivityÆ1)BluetoothÆ1)Turn on/Turn off
To Next Page
Loading...
