LG GE20LU10 User Manual

1. Disc Tray
2. Drive activity indicators
The LED used to indicate the operation of
External Super Multi DVD Rewriter.
3. Emergency Eject Hole
4. Stop/Eject Button
1. USB Connector
This connector is used to connect to the USB
converter cable.
2. Power Connector
This connector is used to connect to the AC
Power adapter cord.
Location and function of controls
Removing the USB converter cable
The drive supports the plug and play(not swap) function of Windows, and can be removed and inserted by
performing the following operation.
1. Stop the application software being currently used.
2. Click the icon “ ” of the taskbar located on your screen’s bottom right side.
3. Click “Safely Remove USB Mass Storage Device-Drive[x:]”.
4. Click “Ok” and then remove the USB converter cable.
1 2
3 4
This following is the general figure of the design of the drive.
The drive’s appearance and specifications may change without prior notice.
Front
Rear
1 2
NOTE
Don’t remove the USB converter cable when the busy indicator on the drive blinks, or during computer startup.

LG GE20LU10 Specifications

General

CD write speed	48 x
CD rewrite speed	32 x
DVD+R write speed	20 x
DVD+RW write speed	8 x
DVD-RW write speed	6 x
DVD-R Double Layer write speed	12 x
CD-RW read speed	40 x
DVD+R read speed	16 x
DVD+RW read speed	13 x
Internal	No
Disc loading type	Tray
Plug and Play	Yes
Drive device, buffer size	2 MB
Dimensions (WxDxH)	160 x 50 x 230 mm

Weight and Dimensions

Weight	1500 g