LG GH24NS72 User Manual

Before installing the drive, turn off
the system power.
Disconnect the power cord,
and remove the cover.
• Remove a vacant 5.25” drive bay panel from
the computer. Slide the drive into the drive
bay.
Connecting the SATA Power
Cable
• Connect the power cable so the projection of
the cable connector side to come to the left
side. Be careful not to connect upside down.
NOTE:
Improper connection may damage the drive
and void the warranty. Generally, the power
connector can only fit one way.
Installing the Drive

Connect to the power connector of the PC.
Red

LG GH24NS72 Specifications

General

CD write speed	48 x
CD rewrite speed	32 x
DVD+R write speed	24 x
DVD+RW write speed	6 x
DVD+R Double Layer write speed	8 x
CD-RW read speed	40 x
DVD+R read speed	16 x
DVD+RW read speed	13 x
DVD-R Double Layer read speed	12 x
Internal	Yes
Product color	Black
Disc loading type	Tray
Interface	-
LightScribe	No
Optical drive type	DVD±R/RW
Burst transfer rate	66.6 MB/s
Disc types supported	CD-R, CD-ROM, CD-RW, DVD, DVD+R, DVD+R DL, DVD+RW, DVD-R, DVD-R DL, DVD-RAM, DVD-ROM, DVD-RW
Drive device, buffer size	2 MB
Mean time between failures (MTBF)	100000 h
DVD-ROM transfer rate (sustained mode)	22.16 MB/s

Weight and Dimensions

Depth	165 mm
Width	147 mm
Height	41.3 mm
Weight	700 g

Summary

Installing the Drive

Disconnect the power cord, and remove the cover

Turn off system power, disconnect the power cord, and remove the computer cover before proceeding.

Connecting the SATA Power Cable

Connect the SATA power cable to the drive and the PC's power connector, ensuring correct orientation.

Connecting the SATA Data Cable

Connect the SATA data cable between the drive and the PC's motherboard, ensuring correct orientation.

Replace the cover, connect the power cord and restart your computer

Reassemble the computer by replacing the cover, reconnecting the power cord, and then restarting the system.