40
HOW TO USE
Detaching and Assembling the
Storage Bins
Glide’N’Serve and Humidity
Controlled Crisper
To remove the Humidity Controlled Crisper and
the Glide’N’Serve, pull out the Crisper
and
Glide’N’Serve
to full extension, lift the front
up, and pull straight out.
To install, slightly tilt up the front, insert the
drawer into the frame and push it back into
place.
To Remove the Glass
(Glide’N’Serve not shown for clarity.)
Lift up the glass under the crisper cover, and
pull up and out.
Door Bins
The door bins are removable for easy cleaning
and adjustment.
1
To remove a bin, simply lift the bin up and
pull straight out.
2
To replace the bin, slide it in above the
desired support and push down until it snaps
into place.
NOTE
Some bins may vary in appearance and
CAUTION
Do not apply excessive force while
.
detaching or assembling the storage
bins.
Do not use the dishwasher to clean
.
the storage bins and shelves.
Regularly detach and wash the
.
storage bins and shelves; they can
become easily contaminated by the
food.
ENGLISH
To Next Page
Loading...
Need help?
General
