EasyManuals Logo

LG GM-B22*QTB User Manual

LG GM-B22*QTB
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
1_MFL67855701_Eng.indd 39 2013.7.24 11:45:38 AM
48
TROUBLESHOOTING
Problem Possible Causes Solutions
Icemaker is not
making enough
ice (continued).
The doors are opened often or
for long periods of time.
If the doors of the unit are opened often, ambient
air will warm the refrigerator which will prevent
the unit from maintaining the set temperature.
Lowering the refrigerator temperature can help,
as well as not opening the doors as frequently.
The doors are not closed
completely.
If the doors are not properly closed, ice
production will be aected. See the Doors will
not close completely or pop open section in Parts
& Features Troubleshooting for more information.
The temperature setting for the
freezer is too warm.
The recommended temperature for
the freezer
compartment for normal ice production is 0°F. If
the freezer temperature is warmer, ice production
will be aected.
Icemaker is not
making ice.
The refrigerator was recently
installed or the icemaker
recently connected.
It may take up to 24 hours for each compartment
to reach the desired temperature and for the
icemaker to begin making ice.
The icemaker is not turned on. Locate the icemaker ON /OFF switch and conrm
that it is in the ON (I) position.
The ice detecting sensor is
obstructed.
Foreign substances or frost on the ice-detecting
sensor can interrupt ice production. Make sure
that the sensor area is clean at all times for proper
o
peration.
The refrigerator is not connected
to a water supply or the supply
shuto valve is not turned on.
Connect the refrigerator to the water supply and
turn the water shuto valve fully open.
The icemaker shuto (arm or
sensor) is obstructed.
If your icemaker is equipped with an ice shuto
arm, make sure that the arm moves freely. If
your icemaker is equipped with the electronic ice
shuto sensor, make sure that there is a clear
path between the two sensors.
A reverse osmosis water
ltration system is connected to
your cold water supply.
Reverse osmosis ltration systems can reduce
the water pressure below the minimum amount
and result in icemaker issues.
(Refer to the “Water Pressure” se
ction.)
ENGLISH

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG GM-B22*QTB and is the answer not in the manual?

LG GM-B22*QTB Specifications

General IconGeneral
BrandLG
ModelGM-B22*QTB
CategoryRefrigerator
LanguageEnglish

Related product manuals