14
INSTALLATION
•  Disassembling/Assembling the Water Lines
b
 Collet 
c
 Tube 
d
 Insert line 
e
 Clip
2
Pull out the water supply lines 
f
. Disconnect 
all the wire harnesses 
g
. Unscrew the ground 
wire 
h
.
•  The number of water supply lines may vary 
depending on the model.
3
Rotate the hinge lever 
i
 counterclockwise. Lift 
the top hinge 
j
 free of the hinge lever latch 
k
.
•  When lifting the hinge free of the latch, be 
careful that the door does not fall forward.
4
Lift the door from the middle hinge pin and 
remove the door.
•  Place the door, inside facing up, on a 
nonscratching surface.
Removing the Right Fridge Door
1
Disconnect all wire harnesses 
a
. Unscrew the 
ground wire 
b
.
•  The number of wire harnesses may vary 
depending on the model.
•  Ground wire is only present on some models.