3-1 DOOR
l
Freezer Door
1. Remove the hinge cover by loosening 1 screw and
pulling it upwards.
2. Loosen hexagonal bolts fixing the upper hinge to the
body and lift the freezer door.
3. Pull out the door gasket to remove from the door foam
Ass’y.
Refrigerator Door
l
1. Loosen hexagonal bolts fixing the lower hinge to the
body to remove the refrigerator door only.
2. Pull out the door gasket to remove from the door foam
3-2 DOOR SWITCH
1. To remove the door switch, pull out it with a ’Ñ’ type
Ass’y.
driver as shown in (figure 9).
2. Disconnect the lead wire from the switch.
3-3 FAN AND FAN MOTOR
1. Remove the freezer shelf.
2. Remove the Cover Lamp-F by loosening 1 screw fixed
to ceiling of Inner Liner.
3. Remove the Grille by pulling it out.
4. Pull out the Shroud and remove the Fan Motor Assy by
loosening 2 screws.
5. Pull out the fan and, separate the Fan Motor, Brackets
and the Guide Fan.
3. DISASSEMBLY
- 8 -
BOLT
HINGE
HINGE COVER
Figure 6
Figure 7
LOWER HINGE
BOLT
Figure 8
Figure 9
GUIDE FAN
FAN
SHROUD
ille fan Cover
GRILLE
COVER GRILL FAN
FAN MOTOR
Figure 12
Figure 11
To Next Page
Loading...
