- 18 -
2-3 HOME BAR
How to disassemble and assemble the ice access door (H/BAR Door)
1) Open the ice access door to carefully remove left rubber packing.
2) While pressing the hinge separated using a pointed tool (driver, drill), move it to the right and carefully separate the ice
access door.
3) The assembly is made in reverse order.
2-4 HOW TO DISASSEMBLE AND ASSEMBLE HANDLE
2. Assemble the new handle, deco and handle, base
1) Assemble new handle, base by tightening 3 screws.
1. Disassemble the handle, deco and handle, base
1) Remove handle, deco by pulling it out with tooling.
Freezer handle
1) 2) 3)
Refrigerator handle
2) Remove handle, base by loosening 3 screws.
Upper (1 screw)
Lower (2 screws)
Upper (1 screw) Lower (2 screws)
2) Assemble handle, deco by pushing it after inserting
upper and lower part first.
To Next Page
Loading...
