23
OPERATION
ENGLISH
- When the function is activated, the temperature of the freezer is automatically switched to -24 ℃.
- The function automatically shuts off after 52 hours and reverts back to the previous setting.
•
Artificial Intelligence
(
f
): When the function is selected, the temperature of the appliance is
automatically adjusted.
- When the function is activated, the temperature of the fridge is automatically switched to 5 ℃ and
the freezer to -18 ℃.
d
Lock
The lock function disables every other button on the display.
• To lock the control panel buttons, press and hold the
Lock
button for 3 seconds until indicator light
turns on and the function is activated.
• To disable the function, press and hold the
Lock
button for 3 seconds until the indicator light turns
off and the function is deactivated.
• The displayed temperature is the target temperature, and not the actual temperature inside the
appliance.
• The actual temperature inside the appliance depends on the following factors: room temperature, the
amount of food and how often the doors are opened, where the appliance is. Set the temperatures by
considering these factors.
• The control panel automatically turns off for energy saving.
• When the appliance is in the energy saving mode, the display remains off until a door is opened or a
button is pressed. Once on, the display remains on for 20 seconds.
• If there is any finger or skin contacts to the control panel while cleaning it, the button function may
operate.
• This appliance incorporates an earth connection for functional purposes only.
InstaView
This feature is only available on some models.
Using the InstaView Door in
Door
The
InstaView Door in Door
lets you see if you’re
running low on frequently used items like
beverages and snacks, without opening the fridge
door.
1
Knock twice on the glass to turn the LED light
inside the
Door in Door
on or off.
To Next Page
Loading...
Need help?
General
