5
Hooking up the unit
a Connect jacks on the unit and your TV (DVD player or Digital Device etc.) using the cables.
Check the jacks of your TV and choose the A, B connection. Picture quality improves in order from A to B.
b Plug the power cord into the power source.
Audio In connection
The unit’s Audio jacks are
colour coded (red for right
audio and white for left
audio). If your TV has only
one output for audio (mono),
connect it to the left (white)
audio jack on the unit.
AM/ FM connection
AM - Connect the AM loop
aerial to the DVD receiver.
FM - Connect the FM aerial.
The reception will be its best
when the two loose ends of
the aerial are in a straight and
horizontal line.
Video Out connection (A)
Connect the VIDEO
OUTPUT(MONITOR) jack on
the unit to the corresponding
input jack on your TV using a
Video cable.
Component Video connection (B)
Connect the COMPONENT VIDEO
(PROGRESSIVE SCAN) OUTPUT jacks on
the unit to the corresponding input jacks on
your TV using a Y PB PR cable.
• If your TV accepts progressive format
signals, you must use this connection and
set [Progressive Scan] in [Display] setup
to [On] (See page 8).
Enjoying audio from an external source and selecting the function
You can enjoy audio from an external source through your unit. And You can select the function.
Press FUNCTION repeatedly to select the desired input source and the function (DVD/CD, USB, AUX, PORTABLE, FM, AM)
To Next Page
Loading...
Need help?
General
