Why can't I tune into radio stations on my LG HT902TBW-A1 Receiver?
If radio stations cannot be tuned in on your LG Receiver, ensure the antenna is securely connected. If the signal strength is weak, try tuning in the station manually. If no stations are preset, preset the stations.
Why is my LG Home Theater System power on, but the DVD/CD Receiver does not work?
If the power is on but the DVD/CD Receiver isn't working, the most likely reason is that no disc is inserted. Insert a disc and check that the DVD or audio CD indicator in the DVD display is lit.
What to do if LG HT902TBW-A1 Receiver remote control does not work?
If the remote control for your LG Receiver isn't working correctly, consider these potential solutions: * Make sure the remote control is pointed directly at the remote sensor on the DVD/CD Receiver. * Ensure you are within about 23 ft (7 m) of the DVD/CD Receiver. * Remove any obstacles that might be blocking the path between the remote control and the receiver. * Replace the batteries in the remote control with new ones.
Why my LG HT902TBW-A1 Receiver has no power?
If your LG Receiver has no power, the power cord may be disconnected. Ensure the power cord is securely plugged into the wall outlet.
What to do if LG HT902TBW-A1 playback picture is poor?
If the playback picture on your LG Receiver is poor, try cleaning the disc.
How to improve poor playback picture on LG Receiver?
If the playback picture on your LG Receiver is poor, try the following: 1. Clean the disc. 2. Ensure a disc is inserted. 3. Make sure a playable disc is inserted, checking the disc type, color system and regional code. 4. Place the disc with the playback side down and correctly within the guide. 5. Turn off any menu screen by pressing the SETUP button. 6. Cancel the Rating function or change the rating level.
What to do if LG Receiver audio CD indicator does not work?
If the power is on but the audio CD indicator on your LG Receiver isn't working, it might be because no disc is inserted. Try inserting a disc.
How to brighten the front panel display on my LG HT902TBW-A1 Receiver?
If the front panel display on your LG Receiver is too dim, press the DIMMER button on the remote control.
Why does my LG Receiver make a loud hum or noise?
If you're hearing a loud hum or noise from your LG DVD/CD Receiver, here are a few possible reasons: * The disc is dirty, so clean the disc. * The speakers and components are connected poorly, so connect the speakers and components securely. * The DVD/CD Receiver is located too close to the TV, so move your TV away from the audio components.
How to fix LG Receiver remote control not working?
If your LG Receiver remote control isn't working correctly, here are some things to check: * Make sure you're pointing the remote control directly at the remote sensor on the DVD/CD Receiver. * Ensure you're using the remote control within a reasonable distance, about 23 ft (7 m). * Remove any obstacles that might be blocking the path between the remote and the receiver. * Try replacing the batteries in the remote control with new ones.
General| Type | Home Theater System |
|---|---|
| Channels | 5.1 |
| Total Power Output | 1000W |
| HDMI Outputs | 1 |
| HDMI | Yes |
| USB Playback | Yes |
| USB | Yes |
| Audio Formats Supported | Dolby Digital, DTS |
| Connectivity | HDMI, USB |
To Next Page
