To Next PageTo Next PageWhat to do if the LG Home Theater System remote control does not work?
If the LG Home Theater System remote control isn't working, first, ensure you're aiming it directly at the receiver's remote sensor. Then, make sure you're within 23 ft (7 m) of the receiver and that there are no obstructions blocking the signal. Finally, try replacing the batteries with fresh ones.
What to do if the LG HT902SB remote control does not work?
If the remote control for your LG Receiver isn't working properly, try these steps: 1. Point the remote control at the remote sensor on the receiver. 2. Ensure you are within 23 ft (7 m) of the receiver. 3. Remove any obstacles between the remote and the receiver. 4. Replace the batteries in the remote with new ones.
How to fix no sound on LG Home Theater System?
If you're not getting any sound or the sound is very quiet from your LG Home Theater System, first, ensure that the equipment connected with the audio cable is set to the correct input mode for DVD audio. Check that the audio cables are securely connected. Make sure the connected equipment is turned on and if the audio connecting cable is damaged, replace it.
How to stop loud hum from LG Home Theater System?
To address loud hum or noise from your LG Home Theater System, start by cleaning the disc. Ensure the speakers and components are securely connected. If the DVD/CD Receiver is too close to the TV, move the TV away from the audio components.
How to troubleshoot no power on LG Home Theater System?
If your LG Home Theater System is not powering on, ensure the power cord is securely plugged into the wall outlet.
How to fix LG Receiver when there is no power?
If your LG Receiver has no power, ensure the power cord is securely plugged into the wall outlet. This should restore power to the device.
General
