To Next PageTo Next PageHow to fix no picture on LG HT904TA-A0P Home Theater System?
If there is no picture on your TV when using the LG Home Theater System, ensure that your TV is set to the correct video input mode to receive the DVD signal. Also, verify that the video cables are securely connected to both the TV and the DVD Receiver.
What to do if my LG DVD Player won't play a DVD?
If your LG DVD Player isn't playing a DVD or CD, make sure a playable disc is properly inserted with the label side facing up. Close any open menus by pressing the SETUP button. If a parental lock is enabled, enter your password or adjust the rating level.
How to fix no picture on my LG HT904TA-A0P?
If there's no picture on your LG Home Theater System, ensure your TV is set to the correct video input mode to receive the DVD signal. Also, check that the video cables are securely connected to both the TV and the DVD receiver.
Why is there little or no sound on my LG HT904TA-A0P Home Theater System?
If you experience little or no sound with your LG Home Theater System, ensure that the equipment connected via the audio cable is set to receive the DVD signal output. Check that the audio cables are securely connected to both the speakers and the receiver. If the issue persists, the audio cables may be damaged and need replacement.
How to stop humming noise on LG HT904TA-A0P Home Theater System?
If you hear a humming noise while playing a DVD or CD on your LG Home Theater System, the disc may be dirty. Clean it with a soft cloth, using outward strokes. Alternatively, the DVD receiver might be too close to the TV, causing feedback. Try moving the DVD receiver and other audio components further away from the TV.
Why is there no sound coming from my LG DVD Player?
If you experience little or no sound from your LG DVD Player, ensure that the connected equipment is set to receive the DVD signal output. Verify that the audio cables are correctly connected to the speakers or receiver. If the problem persists, replace the audio cables, as they may be damaged.
Why is there little or no sound from my LG HT904TA-A0P?
Check that the equipment connected via the audio cable is set to receive the DVD signal output. Ensure the audio cables are securely connected to both the speakers and the receiver. If the audio cables are damaged, replace them.
What causes humming noise while playing a DVD or CD on my LG Home Theater System?
The disc may be dirty, so clean it with a soft cloth using outward strokes. Alternatively, the DVD receiver might be too close to the TV, causing feedback. Try moving the DVD receiver and audio components further away from the TV.
Why is there no picture on my LG Receiver?
If you're not seeing a picture on your LG Receiver, it could be due to a few reasons: * Ensure the power cord is properly connected. * Confirm that your TV is set to the correct video input mode to receive the signal from the DVD Receiver. Select the appropriate video input mode on the TV so the picture from the DVD Receiver appears on the TV screen. * Check that the video cables are securely connected to both the TV and the DVD Receiver. Connect the video cables securely to both the TV and DVD Receiver.
Why is there little or no sound from my LG Receiver?
If you're experiencing little to no sound from your LG Receiver, here are a few things to check: * Make sure that the equipment connected via the audio cable is set to receive DVD signal output. Select the correct input mode of the audio receiver so you can hear the sound from the DVD receiver. * Verify that the audio cables are securely connected to both the speakers and the receiver. Connect the audio cables into the connection terminals correctly. * Inspect the audio cables for any damage and replace them if necessary. Replace with a new audio cable.
General| Brand | LG |
|---|---|
| Model | HT904TA-A0P |
| Category | Home Theater System |
| Language | English |
