What to do if there is an indoor unit & outdoor unit communication error in my LG Heat Pump?
If your LG Heat Pump displays a communication error between the indoor and outdoor units, it means there's no signal being transmitted between them. To resolve this, verify the communication lines connecting the indoor and outdoor units.
What to do if LG Heat Pump shows water inlet & outlet temperature sensor error?
An error with the water inlet & outlet temperature sensor on your LG Heat Pump means there's a disconnection or short circuit in both sensors simultaneously. You should check the connections for both the water inlet and outlet temperature sensors.
How do I fix gas side temperature sensor error on my LG Heat Pump?
If your LG Heat Pump shows a 'Gas side temperature sensor error', it indicates a disconnection or short circuit. Check the connections of the gas side temperature sensor.
What causes liquid side temperature sensor error in LG Heat Pump?
If your LG Heat Pump displays a 'Liquid side temperature sensor error', it means there is a disconnection or short circuit. To solve this, check the connections of the liquid side temperature sensor.
Why does my LG Hydro Kit ARNH10GK2A4 Heat Pump show water tank temperature sensor error?
If you're getting a 'Water tank temperature sensor error' on your LG Heat Pump, it means there's likely a disconnection or short circuit. You should check the connections of the water tank temperature sensor.
How to fix water inlet temperature sensor error on LG Hydro Kit ARNH10GK2A4 Heat Pump?
If your LG Heat Pump displays a 'Water inlet temperature sensor error', it indicates a disconnection or short circuit in the sensor. To resolve this, check the connections of the water inlet temperature sensor.
What does water outlet temperature sensor error mean on LG Hydro Kit ARNH10GK2A4?
If your LG Heat Pump displays a 'Water outlet temperature sensor error', this indicates a disconnection or short circuit in the sensor. Check the connections of the water outlet temperature sensor to address this.
What does Hydro-Kit P.HEX bursting error mean on my LG Hydro Kit ARNH10GK2A4?
If your LG Heat Pump shows 'Hydro-Kit P.HEX bursting error', it means the inlet water temperature is below 5 degrees or there's a water temperature error during defrosting. Make sure the inlet water temperature is above 5 degrees to resolve this.
What to do if my LG Hydro Kit ARNH10GK2A4 Heat Pump displays a flow switch error?
If your LG Heat Pump is showing a 'Flow switch error', it means the flow switch isn't working correctly. Inspect the flow switch to ensure it's operating as it should.
What causes indoor unit EEPROM error in LG Hydro Kit ARNH10GK2A4 Heat Pump?
If your LG Heat Pump displays an 'Indoor unit EEPROM error', it could be due to communication issues between the microprocessor and the EEPROM, or damage to the EEPROM itself. Try resetting or replacing the EEPROM.
Safety guidelines for installation work, including electrical and structural aspects.
Safety measures to follow during the operation of the unit and related components.
Technical specifications, model details, and supported accessories.
Steps for selecting location, space, and foundation.
Procedures for water piping, tank, solar thermal, and freezing protection.
Procedures for refrigerant piping, welding, insulation, and wiring.
Identification of connection points for various accessories.
Steps for installing remote controllers and thermostats.
Procedures for connecting pumps, sensors, and valves.
Procedures for installing and wiring the independent power module.
Configuration of DIP switches for various system functions.
Setup for group control and entering installer mode for advanced settings.
Setting operational temperature ranges, tank disinfection, and DHW times.
Important checks and procedures for performing operation tests.
Guide to identifying and resolving common error types and issues.
Information on the product's sound pressure emission levels.
Freon concentration limits and explanation of model naming conventions.
General| Model Number | ARNH10GK2A4 |
|---|---|
| Heating Capacity | 10 kW |
| Energy Efficiency Ratio (EER) | 3.5 |
| Coefficient of Performance (COP) | 4.0 |
| Refrigerant | R32 |
| Noise Level | 45 dB(A) |
| Type | Air to Water Heat Pump |
| Application | Residential |
| Power Supply | 220-240V, 50Hz |
To Next Page