LG KP105 - Tx Test

LGE Internal Use Only Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
- 113 -
12. STAND ALONE TEST
12.2 Tx Test
12.2.1 Click “Non signaling mode” bar and then confirm “OK” test in the
command line
12.2.2 Put the number of TX Channel in the ARFCN
12.2.3 Select “TX” in the RF mode menu and “PCL” in the PA Level menu
12.2.4 Finally, Click “Write All” bar and try the efficiency test of Phone
➀
➂
➁
➃