LGE Internal Use Only
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3.10 Audio Interface
The audio front-end of E-GOLDvoice offers the digital and analog circuit blocks for both receive and
transmit audio operation and ringing. It features a high-quality, digital-to-analog path with amplifying
stages for connecting acoustic transducers to the E-GOLDvoice. In the transmit direction the supply
voltage generation for microphones, low-noise amplifier and analog to digital conversion are integrated
on the E-GOLDvoice.
For E-GOLDvoice the EPp1/EPn1 driver are used as differntial Earpiece-Driver, EPPa1 is used as
single-ended Headset-Driver.
The audio front-end itself can be considered to be organized in three sub-blocks:
• Interface to processor cores (TEAKlite and - indirectly - C166S)
• Digital filters
• Analog part.
3. TECHNICAL BRIEF
- 33 -
Figure 3-10-1 Audio interface
To Next Page
Loading...
