Disconnecting
the charger
Disconnect the travel adapter
from the phone as shown in the
diagram. Make sure you pull by
the plug, not the cord.
How to use a
microSD
memory card
<MicroSD memory card>
<How to insert a microSD
memory card>
1. Lift the plastic cover which
protects the microSD slot.
2. Insert the memory card
into the slot with the metal
contacts facing down. Do not
force the memory card into
the slot, if the card does not
slide in easily, please check
that the card is being inserted
the correct way or if there is a
foreign object in the slot.
3. Once inserted, push the
memory card until you hear
a Click, meaning that the
microSD has been correctly
engaged.
4. Close the plastic slot
protection.
5. Do not remove the memory
card when reading/writing
the memory card.
Attention:
v
Avoid using the Flash
Memory Card when the
battery is low.
v
When writing to the card,
wait for the operation to
complete before removing
the card.
v
The card is designed to fit
easily into the system one
way only.
v
Do not bend the card or force
it into the slot.
v
Do not insert any memory
cards other than microSD.
Support up to 2GB microSD.
For more information on the
microSD, please refer to the
memory card instruction manual.
Memory card
formatting
Before you start to use the
memory card you have to
format it. After you insert the
memory card, the message
for format pop up and you can
format easily.
Note
v
MicroSD has been already
formatted usually.
GETTING STARTED
To Next Page
Loading...
