1. Tap Start > Settings > Personal tab > Lock.
2. Select the Prompt if device unused for check
box, and in the box to the right, select how
long your device must be turned off before
a password is required. In the Password type
box, select the type of password you would like
to use. Enter the password and, if necessary,
confirm the password. If your device is
configured to connect to a network, use a strong
password to help protect network security.
3. On the Hint tab, enter a phrase that will help
you remember your password, but doesn’t
allow others to guess your password. The hint
will be displayed after the wrong password is
entered four times.
4. Tap
OK. The next time the device is turned on,
you will be prompted to enter your password.
Note
v
Each time a wrong password is entered, the time the
device takes to respond will get longer and longer
until the device appears to be not responding.
If you forget your password, you must follow the
instructions in your owner’s manual to clear memory
before you can access your device.
To change your password
1. Tap Start > Settings > Personal tab > Lock.
You will be prompted to enter your current
password.
2. In the Password box, enter your new password.
3. On the Hint tab, enter a phrase that will help
you remember your new password, but
doesn’t allow others to guess your password.
The hint will be displayed after the wrong
password is entered four times.
4. Tap OK.
To display owner information on the
Today screen
1. Tap Start > Settings > Personal tab > Owner
Information.
2. On the Options tab, select the Identification
information check box.
3. On the Options tab, select the Notes check box
if you want additional text displayed, such as:
Reward if found.
4. On the Notes tab, enter the additional text.
Tip
v
To display owner information on the Today screen,
tap Start > Settings > Personal tab > Today. On the
Items tab, select the Owner Info check box.
SETTINGS
To Next Page
Loading...
