A3
Connecting the Display
Before setting up the product, please make sure the power to the product,
PC, and other attached devices is turned off.
Connecting the stand base
1. Align the hooks on the stand base with the matching slots in the base of
the product.
2. Insert the hooks into slots.
Important
This illustration depicts the general model of connection. Your product may
differ from the items shown in the picture.
Once you connect the stand base, try not to disconnect it.
Do not carry the product upside down holding only the stand base. The
product may fall and get damaged or injure your foot.
Stand Base
Hook
To Next Page
Loading...
