A16
Use this button to select the icon or make an adjustment in the OSD (On Screen Display) menu.
When two computers are connected, use this button to select the input signal for the
destination computer.
If only one computer is connected, it will be recognized automatically.
Use this button to select the optimized image conditions, depending on the surrounding
environment (brightness, type of the image). See the page K24 for more details.
Select the icon to adjust in the OSD screen.
*Automatic screen adjustment function - The screen will be automatically adjusted
when you press the AUTO/SET button. (See the page K19)
> <
button
AUTO/SET button
Lightview <
button
To Next Page
Loading...
