A19
Specifications L1930S FH
NOTE
Information in this document is subject to change without notice.
19 inches (48.26cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
19 inches viewable
0.294 mm pixel pitch
Horizontal Freq. 30 - 83kHz (Automatic)
Vertical Freq. 56 - 75Hz (Automatic)
Input Form Separate TTL, Positive/Negative
SOG (Sync On Green)
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7Vp-p/75ohm)
Max VESA 1280 x 1024@75Hz
Recommend VESA 1280 x 1024@60Hz
DDC 2B
Normal :
45W
Stand-by/Suspend
≤ 2W
DPMS Off ≤ 2W
Width 44.44 cm / 17.50 inches
Height 43.67 cm / 17.21 inches (Min)
50.67 cm / 19.95 inches (Max)
Depth 22.00 cm / 8.66 inches
Net 7.3kg (16.09lbs)
Tilt -5˚~20˚
Swivel 300˚
Height 2.76 inch (70.0mm)
AC 100-240V~ 50/60Hz 1.0A
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 95 % non-Condensing
Attached( ), Detachable ( O )
Attached( ), Detachable ( O )
Wall-outlet type or PC-outlet type
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
&Weight
(with tilt stand)
Tilt/Height Range
Power Input
Environmental
Conditions
Tilt Stand
Signal cable
Power cord
To Next Page
Loading...
