What does it mean if my LG L194WS-SF Monitor displays 'OUT OF RANGE'?
The 'OUT OF RANGE' message appears when the signal from the PC (video card) is out of the horizontal or vertical frequency range of the display. Refer to the 'Specifications' section of this manual and configure your display again.
What to do if my LG Monitor is not bright enough?
If the power is on and the power indicator is blue or green, adjust the brightness and the contrast.
What to do if my LG L194WS-SF says 'CHECK SIGNAL CABLE'?
If you see a 'CHECK SIGNAL CABLE' message on the screen, it means the signal cable between your PC and your display is not connected. Check the signal cable and try again.
How to unlock OSD on LG L194WS-SF Monitor?
If you see a 'OSD LOCKED' message on the screen, you can unlock the OSD controls by pushing the MENU button for several seconds until the message 'OSD UNLOCKED' appears.
What to do if the power indicator amber on LG Monitor?
If the power indicator is amber, the display is in power saving mode. Try moving the mouse or pressing any key on the keyboard to bring up the screen.
How to turn on LG L194WS-SF?
Press the Power button.
General| Screen Size | 19 inches |
|---|---|
| Resolution | 1440 x 900 |
| Aspect Ratio | 16:10 |
| Panel Type | TN |
| Brightness | 300 cd/m² |
| Response Time | 5 ms |
| Viewing Angle (Vertical) | 160 degrees |
| Connectivity | VGA, DVI-D |
| Power Consumption (Operational) | 36W |
| Power Consumption (Standby) | 1 W |
| Viewing Angle (Horizontal) | 160 degrees |
To Next Page
