LG LAS650M - Page 24

Connecting24
Connecting
2
1. Turn on the unit by using
1
on the remote
control or
1/!
on the unit. The LED indicator
starts to blink in white.
2. On your smart device, launch Music Flow Player
app. Select [Start] to install the speaker.
3. Check the LED indicator on the unit and select
[Next] to go to the next step.
4. Select [Wired connection] on the screen.
5. Connect one end of the LAN cable to the
speaker’s ETHERNET port and connect the other
end to your wireless router.
Wait a moment until the LED indicator stops
blinking and stays white.
6. Then select [Next] on the screen.