LG LCD TV - Connecting with an HDMI Cable


EXTERNAL EQUIPMENT SETUP



► The TV can receive video and audio signals simultaneously when
using an HDMI cable.
► If the DVD does not support Auto HDMI, you must set the output reso-
lution appropriately.
► Check that your HDMI cable is High Speed HDMI Cable. If the HDMI
cables are not High Speed HDMI Cable, flickering or no screen dis-
play can result. Please use the High Speed HDMI Cable.
1
Connect the HDMI output of the external equipment (digital set-
top box, DVD, etc.) to , (Except for
19/22LH2
***
) jack on the TV.
2
Turn on the external equipment.
(
Refer to the external equipment's manual for operating instruc-
tions.)
3
Select (Except for 19/22LH2
***
)input source
using the  button on the remote control.
ANTENNA
IN
(
RGB
)
S
PEAKER
O
U
T
VOLUME CONTROL
1
2
/DVI IN
(8 )
1
2
/DVI IN

Connect the external speaker to the 
 jack on the TV.
1

Cable
Spec.
GND / Up / Down
• Each Up/ Down pin is
pulled to 3.3V with CPU
GPIO.
• CPU detects transition
from 3.3V to GND level for
volume control.

VOLUME CONTROL
STEREO
(8 )
SPEAKER
OUT
(RGB)
GND
1
1
Control port for Speaker out
UP
DOWN
GND
RIGHT
LEFT
GND