TO USE A USB DEVICE
■ Stop the playing movie file.
► Press the
►
button to return to normal playback.
During playback, press the
button.
■ Still screen is displayed.
■ If no buttons are pressed on the remote control for 10 minutes after pausing, the
TV returns to the playback state.
■ Press the
button and then use the ►►button for slow motion.
◄◄
/ ►►
When playing,
repeatedly, press the
◄◄
button to speed up ◄◄(x2)
-> ◄◄◄(x4) ->
◄◄◄◄(x8) ->◄◄◄◄◄(x16) ->◄◄◄◄◄◄(x32) .
repeatedly, press the
►►
button to speed up ►►(x2)-> ►►►(x4) ->
►►►►(x8) ->►►►►►(x16) -> ►►►►►►(x32).
■ Pressing these buttons repeatedly increases the fast forward/reverse speed.
or
Show the menu.
or
Hide the menu on the full-sized screen.
■ To see the menu again on the full-sized screen, press button to display.
< >
■ When using the
<
or
>
button during playback a cursor indicating the position can
be viewed on the screen.
Press the button repeatedly to change the brightness of your
screen.(Refer to p. 86)
Press the button repeatedly to select the desired source.(Refer to p. 42)
To Next Page