What to do if my LG LDF5545BD/00 Dishwasher displays the OE error?
If your LG Dishwasher shows the 'OE' error, it means there's a drainage problem. You should check the water drain hose for clogs, kinks, or freezing. Also, inspect the air gap or garbage disposal for any blockages and clean them if necessary. Finally, make sure to clean the filters, as clogged filters can also cause this error.
What does CL mean on LG LDF5545BD/00 Dishwasher?
The code 'CL' on your LG Dishwasher is not an error code. It indicates that the control lock is activated. To deactivate it, press and hold the Half Load and Energy Saver buttons simultaneously for three seconds.
What does the AE error mean on an LG LDF5545BD/00 Dishwasher?
The 'AE' error on your LG Dishwasher indicates a water leakage. Immediately turn off the water supply to the dishwasher. The dishwasher will make an alert sound for 10 seconds and run the drain pump intermittently, and it will automatically power back on until the error is resolved.
What does FE error mean on LG LDF5545BD/00?
The 'FE' error on your LG Dishwasher means excessive water is being supplied. Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-888-542-2623 (Canada).
What does HE error mean on LG Dishwasher?
The 'HE' error code on your LG Dishwasher indicates a heater circuit failure. Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-888-542-2623 (Canada).
What does tE error mean on LG LDF5545BD/00?
The 'tE' error on your LG Dishwasher indicates a water temperature sensor error. Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-888-542-2623 (Canada).
What does LE error mean on LG LDF5545BD/00?
The 'LE' error on your LG Dishwasher indicates a wash motor error. Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-888-542-2623 (Canada).
What does NE error mean on LG LDF5545BD/00?
The 'NE' error on your LG Dishwasher indicates a vario motor error. Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-888-542-2623 (Canada).
What does P1, Pz, P3, P4 mean on my LG LDF5545BD/00?
The codes 'P1', 'Pz', 'P3', 'P4' on your LG Dishwasher are not error codes. They indicate the current Download Cycle being used.
What does N:#, U:#, d:#, t# mean on LG Dishwasher?
The codes 'N:#', 'U:#', 'd:#', 't#' (where # is a number) on your LG Dishwasher are not error codes. These codes are used when testing the dishwasher. To make the code disappear, power the unit off and then on again.
General| Style | built-in dishwashers |
|---|---|
| Color | black stainless steel |
| Load Capacity | 15 |
| Number of Cycles | 9 |
| Cycle Selections | auto, heavy, delicate, normal, turbo, download cycle, machine clean, rinse, express |
| Options/Settings | dual zone, half load, energy saver, high temp, extra dry, delay start, control lock, night dry |
| Drying Type | condenser drying |
| Noise level | 48 decibels adjusted |
| Control Type | touchpad |
| Delay Start | yes |
| Load Sensor | yes |
| Number of Racks | 2 |
| Cycle Signal | yes |
| Water Filter | no |
| Water Softener | no |
| Food Disposer | no |
| Sanitize Settings | yes |
| Smart Home | no |
| Annual Energy Consumption | 258 kilowatt hours |
| Water Consumption Per Cycle | 2.8 gallons |
| Voltage | 120 volts |
| Current | 15 amperes |
Weight and Dimensions| Depth | 24 5/8 inches |
|---|---|
| Height | 33 5/8 inches |
| Width | 23 3/4 inches |
| Net Weight | 75 pounds |
To Next Page
