LG LDG3019ST Installation Manual

INSTALLATION INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE INSTALLATION
INSTALLATION SAFETY INSTRUCTIONS
XS
BEFORE YOU BEGIN
Read these instructions completely
and carefully.
Installation of this range must conform with local
codes, or in the absence of local codes, with the
National Fuel Gas Code, ANS] Z223.1/NFPA.54,
latest edition. In Canada, installation must
conform with the current Natural Gas Installation
Code, CAN/CGAB149.1 or the current Propane
Installation Code, CAN/CGA-B149.2, and with
local codes where applicable. This range has
been design-certified by CSA International
according to ANSI 221.1, latest edition and
Canadian Gas Association according to
CAN/CGA-1.1 latest edition.
As with any appliance using gas and generating
heat, there are certain safety precautions you
should follow. You will find these precautions in
the Important Safety Information section in your
User’s Guide. Read them carefully.
* IMPORTANT — Save these instructions
for local electrical inspector’s use.
* IMPORTANT — Observe all governing
codes and ordinances.
Note to Installer: Leave these instructions with
the appliance after installation is completed.
Note to Consumer: Keep the User’s Guide and
installation Instructions for future reference.
NOTE: This appliance must be properly
grounded.
« The electrical diagram is in an envelop
attached to the back of the range.
* Skill level — Installation of this appliance
requires basic mechanical skills.
¢ Proper installation is the responsibility of
theinstaller.
« Product failure due to improper installation is
not covered under the Warranty.
* Remove all tape and packaging.
¢ Make sure the burners are properly seated and
level.
« Take the accessory pack out of the oven and/or
drawer.
* Check to be sure that no range parts have
come loose during shipping.

LG LDG3019ST Specifications

General

Brand	LG
Model	LDG3019ST
Category	Ranges
Language	English