40
SMART FEATURES
The NFC Antenna Position
When using the Tag On function, position the smart
phone so that the NFC antenna inside the back of the
smart phone matches the position of the Tag On icon
on the appliance.
If the application is not able to show a target range,
position the center back of the smart phone over
the Tag On icon on the appliance. If the connection
is not made immediately, move the smart phone
very slightly in a widening circular motion until the
application verifies the connection.
Because of the characteristics of NFC, if the
transmission distance is too far, or if there is a metal
sticker or a thick case on the phone, transmission will
not be good.
Touch [
] in the LG ThinQ application for a more
detailed guide on how to use the Tag On function.
Using Tag On with
Applications
Touch an LG appliance's Tag On logo with an
NFC-equipped smart phone to use the LG ThinQ
application's LG Smart Diagnosis™, Oven Settings,
and EasyClean
®
features.
Smart Diagnosis™
Allows you to diagnose and troubleshoot problems
with your range.
EasyClean
®
(For Model : LDG4315 / LDG4313)
Allows you to set EasyClean
®
alerts, read the
instruction guide, and simulate and compare energy
consumption when using EasyClean
®
versus
self-clean cycles.
Oven Settings
Allows the user to change oven settings, including
the hour mode, preheat alarm light, beeper volume,
temperature units, convection auto conversion, and
thermostat adjustment.
IMPORTANT : Features could be added or deleted
when the LG ThinQ application is updated. Data
saved on the LG ThinQ application could be deleted
when the application is updated or your smart phone
is changed.
To Next Page
Loading...
Need help?
General
