LG LDX-514 - User Manual

Other manuals for LG LDX-514

Warranty1 page

Specifications2 pages

Questions and Answers

K
Karen NixonAug 15, 2025
What to do if my LG DVD VCR Combo has no power?
- T
  thompsonjamesAug 15, 2025
  If your LG DVD VCR Combo isn't powering on, the power cord might be disconnected. Ensure the power cord is securely plugged into the wall outlet.
L
lashleyAug 18, 2025
Why is my LG DVD VCR Combo remote control not working?
- P
  Patricia MillerAug 18, 2025
  If the remote control for your LG DVD VCR Combo isn't working correctly, check these possible causes: * Obstacle in the path: Remove any obstacle between the remote control and the unit. * Exhausted batteries: Replace the batteries with new ones. * Remote not pointed correctly: Point the remote control at the remote sensor of the DVD+VCR. * Remote too far: Operate the remote control within 23ft (7m). * Using wrong mode: When using a VCR, first press the VCR button. When using a DVD, first press the DVD button.
A
Anthony GeorgeAug 21, 2025
Why is there distorted or no sound from my LG DVD VCR Combo?
- R
  Raymond MeadowsAug 21, 2025
  If you're experiencing distorted or no sound from your LG DVD VCR Combo, check the following: 1. Ensure the equipment connected with the audio cable is set to receive audio from the DVD+VCR by selecting the correct input mode on the audio receiver. 2. Verify the audio cables are securely connected to the jacks. 3. Confirm that the equipment connected with the audio cable is turned on. 4. Check that the AUDIO options are set to the correct position. 5. If in HDMI mode, ensure audio selection is set to PCM.
M
Mr. Anthony Sanders IVAug 25, 2025
What to do if my LG DVD VCR Combo does not start playback?
- K
  Kristin RobertsAug 26, 2025
  If your LG DVD VCR Combo isn't starting playback, consider these potential causes: * No disc is inserted: Insert a disc or tape, ensuring the disc or tape indicator in the display window is lit. * Unplayable disc inserted: Insert a playable disc, verifying the disc type and Regional code. * Disc placed upside down: Place the disc with the playback side down. * Disc not placed within the guide: Place the disc correctly on the disc tray inside the guide. * Dirty disc: Clean the disc. * Rating level is set: Cancel the Rating function or change the Rating level.
K
Kevin FullerAug 28, 2025
How to fix abnormal picture on LG DVD VCR Combo?
- J
  johnsontraciAug 28, 2025
  If you're getting an abnormal or no picture on your LG DVD VCR Combo, it could be due to several reasons: * The TV is not set to receive DVD+VCR signal output: Insert a disc or tape and select the appropriate video input mode on the TV. * The video cable is not connected securely: Check the connection. * The HDMI mode is on: Set HDMI on the front panel to OFF. * Unit output setting and TV resolution capabilities mismatch: Check TV capability. * Wrong cable connection: Check the connection.
J
Jason CruzAug 31, 2025
Why is the playback picture poor on my LG DVD VCR Combo?
- A
  andrew71Sep 1, 2025
  If the playback picture quality is poor on your LG DVD VCR Combo, it might be due to: * A dirty disc: Clean the disc. * TV channels not tuned properly: Check tuning and carry out tuning again. * Dirty tape heads: Clean video heads.
S
Sandra WilkinsonSep 4, 2025
How to get Hi-Fi sound on LG DVD VCR Combo?
- J
  John RobertsSep 4, 2025
  If you're not getting Hi-Fi sound on your LG DVD VCR Combo, the audio mode might not be set properly. Select STEREO by repeatedly pressing AUDIO on the remote control.
B
Benjamin VaughnSep 7, 2025
How to fix camcorder image not showing properly on LG DVD VCR Combo?
- L
  lindsey55Sep 7, 2025
  If the camcorder image isn't displaying correctly on your LG DVD VCR Combo: * Ensure the camcorder is turned on and operating. * Verify that the DVD+VCR SOURCE SELECT is set to LINE1 or LINE2 by pressing INPUT to select the appropriate LINE input.
M
Melissa JonesSep 10, 2025
Why timer recording is not possible on LG DVD VCR Combo?
- M
  myersdanielleSep 10, 2025
  If timer recording isn't working on your LG DVD VCR Combo: * The clock in DVD+VCR is not set to correct time: Set clock to correct time. * Timer has been programmed incorrectly: Reprogram Timer. * Indicator light does not appear after programming timer: Reprogram Timer and turn DVD+VCR off to enable timer.