LG RC897T - User Manual

Other manuals for LG RC897T

Technical Specifications2 pages

Questions and Answers

M
Mike JamesSep 23, 2025
How to reset my LG RC897T?
- D
  Dawn DavisSep 23, 2025
  Press and hold the POWER button for at least five seconds or unplug the power cord, wait at least five seconds, and then plug it in again.
C
Christopher RodriguezAug 23, 2025
Why is there no sound on my LG DVD VCR Combo?
- K
  Katherine FisherAug 23, 2025
  Check that the audio connection is securely connected. Also, verify the input source setting on your amplifier or the connection to the amplifier. If the unit is in scan, slow motion, or pause mode, this could also cause the issue. Try selecting another audio channel or source using the AUDIO button. If the audio signal does not come through the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack, check the “Audio” setup setting.
K
Kim BauerAug 25, 2025
Why is my LG RC897T DVD VCR Combo remote control not working?
- H
  herreramichaelaAug 26, 2025
  Ensure the remote control is pointed at the remote sensor of the unit and that it is not too far away. Also, make sure there is no obstacle in the path between the remote control and the unit. Check if the batteries in the remote control are exhausted. If you recently replaced the batteries, the remote’s manufacturer code may have returned to the default setting; in this case, reset the code.
S
Susan MitchellAug 26, 2025
What to do if my LG RC897T DVD VCR Combo won't start playback?
- K
  Kaitlyn MckeeAug 27, 2025
  Make sure you have inserted a playable disc, with the playback side down, and placed correctly on the disc tray inside the guide. Clean the disc if necessary. Also, try to cancel the Rating function or change the rating level.
C
Christopher ReynoldsAug 27, 2025
How to fix LG DVD VCR Combo when channel is not found?
- N
  Natasha GreenAug 27, 2025
  Check your antenna connection.
J
Jeffrey RileySep 17, 2025
What happens if two or more timer programs overlap on LG RC897T DVD VCR Combo?
- D
  Danielle JohnsonSep 18, 2025
  The earlier program takes priority. When the earlier program finishes, the later program starts. If two programs are set to start at exactly the same time, the program entered first takes priority. If the disc is damaged, the recording may not complete successfully.
A
alexandersextonSep 14, 2025
Why my LG RC897T cannot play MP3/WMA/JPEG/MPEG4 files?
- Z
  Zachary FosterSep 14, 2025
  The files may not be recorded in a format that the unit can play. The unit may not support the codec of the MPEG4 movie file, or the resolution is higher than the unit can support.
A
amylongSep 15, 2025
Why I cannot enter a timer program on my LG RC897T DVD VCR Combo?
- S
  Sarah MartinSep 16, 2025
  A recording may already be underway, or the time you’re trying to set has already passed. There may already be 16 timer programs set.
M
Maria JonesSep 6, 2025
Why does picture noise appear on my LG RC897T DVD VCR Combo?
- C
  Carolyn SpencerSep 6, 2025
  Picture noise can appear if you are playing a disc recorded in a color system that is different from your TV, or if the video signal from the external component is copy-protected. Set the resolution that your TV can accept.
P
pwillisSep 3, 2025
Why can't I play a disc recorded on my LG RC897T DVD VCR Combo on another player?
- R
  Ryan DorseySep 3, 2025
  Finalize the disc. Check the disc compatibility of the player. Ensure the disc is placed correctly on the disc tray inside the guide. Discs recorded with copy-once material cannot be played on other players.