To Next Page
K
Karen NixonAug 15, 2025
What to do if my LG DVD VCR Combo has no power?
- TthompsonjamesAug 15, 2025
If your LG DVD VCR Combo isn't powering on, the power cord might be disconnected. Ensure the power cord is securely plugged into the wall outlet.
What to do if my LG DVD VCR Combo has no power?
If your LG DVD VCR Combo isn't powering on, the power cord might be disconnected. Ensure the power cord is securely plugged into the wall outlet.
Why is my LG DVD VCR Combo remote control not working?
If the remote control for your LG DVD VCR Combo isn't working correctly, check these possible causes: * Obstacle in the path: Remove any obstacle between the remote control and the unit. * Exhausted batteries: Replace the batteries with new ones. * Remote not pointed correctly: Point the remote control at the remote sensor of the DVD+VCR. * Remote too far: Operate the remote control within 23ft (7m). * Using wrong mode: When using a VCR, first press the VCR button. When using a DVD, first press the DVD button.
Why is there distorted or no sound from my LG DVD VCR Combo?
If you're experiencing distorted or no sound from your LG DVD VCR Combo, check the following: 1. Ensure the equipment connected with the audio cable is set to receive audio from the DVD+VCR by selecting the correct input mode on the audio receiver. 2. Verify the audio cables are securely connected to the jacks. 3. Confirm that the equipment connected with the audio cable is turned on. 4. Check that the AUDIO options are set to the correct position. 5. If in HDMI mode, ensure audio selection is set to PCM.
What to do if my LG DVD VCR Combo does not start playback?
If your LG DVD VCR Combo isn't starting playback, consider these potential causes: * No disc is inserted: Insert a disc or tape, ensuring the disc or tape indicator in the display window is lit. * Unplayable disc inserted: Insert a playable disc, verifying the disc type and Regional code. * Disc placed upside down: Place the disc with the playback side down. * Disc not placed within the guide: Place the disc correctly on the disc tray inside the guide. * Dirty disc: Clean the disc. * Rating level is set: Cancel the Rating function or change the Rating level.
How to fix abnormal picture on LG DVD VCR Combo?
If you're getting an abnormal or no picture on your LG DVD VCR Combo, it could be due to several reasons: * The TV is not set to receive DVD+VCR signal output: Insert a disc or tape and select the appropriate video input mode on the TV. * The video cable is not connected securely: Check the connection. * The HDMI mode is on: Set HDMI on the front panel to OFF. * Unit output setting and TV resolution capabilities mismatch: Check TV capability. * Wrong cable connection: Check the connection.
Why is the playback picture poor on my LG DVD VCR Combo?
If the playback picture quality is poor on your LG DVD VCR Combo, it might be due to: * A dirty disc: Clean the disc. * TV channels not tuned properly: Check tuning and carry out tuning again. * Dirty tape heads: Clean video heads.
How to get Hi-Fi sound on LG DVD VCR Combo?
If you're not getting Hi-Fi sound on your LG DVD VCR Combo, the audio mode might not be set properly. Select STEREO by repeatedly pressing AUDIO on the remote control.
How to fix camcorder image not showing properly on LG DVD VCR Combo?
If the camcorder image isn't displaying correctly on your LG DVD VCR Combo: * Ensure the camcorder is turned on and operating. * Verify that the DVD+VCR SOURCE SELECT is set to LINE1 or LINE2 by pressing INPUT to select the appropriate LINE input.
Why timer recording is not possible on LG DVD VCR Combo?
If timer recording isn't working on your LG DVD VCR Combo: * The clock in DVD+VCR is not set to correct time: Set clock to correct time. * Timer has been programmed incorrectly: Reprogram Timer. * Indicator light does not appear after programming timer: Reprogram Timer and turn DVD+VCR off to enable timer.
General| Brand | LG |
|---|---|
| Model | LDX-514 |
| Category | DVD VCR Combo |
| Language | English |
Covers electrical shock, laser safety, fire, moisture, and installation hazards.
Encompasses 14 points on safe operation, handling, cleaning, and installation.
Lists playable discs (DVD, VCD, CD, MP3, etc.) and notes on playback.
Identifies and explains the function of all buttons, lights, and displays on the front panel.
Covers playback, navigation, search, repeat, and zoom functions.
Details all available input (Antenna, VHS) and output (Video, Audio, HDMI) jacks.
Details connecting for high-definition video output using component cables.
Guides on connecting via HDMI, setting modes, and understanding its features.
Explains connecting for analog stereo and digital multi-channel audio.
Covers setting the clock automatically or manually and timer recording basics.
Details settings for Dolby Digital, DTS, Sample Frequency, and DRC.
Guides on setting parental control ratings, passwords, and area codes.
Provides step-by-step instructions for playing a video cassette.
Step-by-step guide for recording TV programs onto a VHS tape.
Introduces the process for setting up timed recordings, including clock requirements.
Details how to set program options like channel, speed, and repeat for timer recordings.
Guides on recording for a preset length without using the program timer.
Provides instructions on how to copy DVD content onto a VHS tape.
Guides on selecting and playing tracks from Audio CDs and MP3/WMA files.
Explains how to create a program list of favorite tracks for playback.
Guides on playing DivX files and details compatibility requirements.
Provides solutions for problems related to power, abnormal/no picture, and distorted sound.
Offers troubleshooting steps for poor playback quality and incorrect connections.
Addresses issues with playback not starting and video tape insertion.
