LG LF300CP - Remote Control Preparation; Mounting the Remote Holder

Installation of Unit
Installation Manual 13
ENGLISH
Connecting the Cable to Indoor Unit
• The inside and outside connecting cable can be connected after opening the side inlet grille.
1. Open the side-inlet grille manually (Fig. 1)
2. Open the panel (A) with driver ( ) (Fig. 2)
3. Connect the connecting pipe (Fig. 3)
4. Connect the cables (LG doesn't supply) to the terminal block in the front panel. (Fig. 3)
5. Secure the panel (A) to the original position with the screw ( ).
6. Insert the plastic tube (bushing) in small hole in order to prevent the connecting wires from
being cut by sharp edge of the hole.(Fig. 4), America, Canada only.
7. Close the side-inlet grille.
54321
54321
54321
Wiring Details(B)
1 Cooling Model
2 Heat Pump Model
3 Heat Pump + Heater Model
To Outdoor Unit
To Outdoor Unit
To Outdoor Unit
21
765 4(L2)3(L1)
(America, Canada Only)
To Outdoor Unit
Fig. 1 Fig. 2
"A"
"B"
Fig. 3
Fig. 4
Plastic tube
(Bushing)