Filter Cleaning
Please clean it once in a week.
1. Pull the knob of air inlet out.
The antibiotic filter should be clean without disassembly as it is
united with air inlet.
Lift the front panel. After lifting up the filter tab a bit, take the
filter out slowly
2. Clean it with the vacuum cleaner or brush off dust.
When the contamination is serious, wash out with a neutral
detergent
(Do not use hot water over 104°F). Dry it in the shade,
avoiding fire or
not to be exposed direct to the sun.
3. Fix the air inlet with filter into the hole of inlet.
• For safety, unplug prior to cleaning.
• Dusty filter gives bad effects on cooling performance to cause high electricity cost,
so that you’d better clean it once in a week.
To Next Page
Loading...
