19INSTALLATION
ENGLISH
Assembling the Left Refrigerator
Door
• Install the left refrigerator door after the right
door is installed.
1 Make sure that the hinge pin sleeve is
inserted in the bottom of the door. Lower the
door onto the middle hinge pin.
2 Align the door with the cabinet.
3 Line up the top hinge with the holes in the top
of the refrigerator. Use the three bolts to
replace the hinge. Tighten the bolts.
4 Connect all the wire harnesses a and the
ground screw b.
5 Place the hinge cover c in place. Insert and
tighten the cover screw
d.
Connecting Refrigerator to
Water Supply
Before Beginning
These instructions assume you have an existing
water supply connection for the refrigerator. If
necessary, call a qualified plumber to install a
water supply line for the refrigerator.
• Turn the icemaker OFF if the refrigerator will be
used before the water line is connected.
• Do not install the icemaker tubing in areas
where the ambient temperatures fall below
freezing.
• Connect to potable water supply only.
• To prevent burns and product damage, only
connect the refrigerator water line to a cold
water supply.
• Wear eye protection during installation to
prevent injury.
Water Pressure
You will need a cold water supply.
To Next Page
Loading...
Need help?
General
