REFRIGERATOR DISASSEMBLY
Removal of gasket clips. The other door is just the opposite. The tabs fit into a
rectangular recess in the door and are held by a retaining clip on each side.
Press the clip inward with a small screwdriver, as shown in the photo, to release
the clips. They can be re-installed in the same manner.
Removing the gasket is easy after the clips are released.
Start at the top corner on the side
where the door edges meet. Pull the
gasket out of the channel from top to
bottom, holding the top to keep it from
falling. Continue across the bottom, up
the side, and back across the top of the
door until the gasket is free.
LFX21960ST/LFX25960xx Page 21 of 75 TRAINING MANUAL
To Next Page
Loading...
