REFRIGERATOR DISASSEMBLY
FREEZER FAN AND MOTOR
1. Open the freezer. It may be
easier to work on the freezer
fan and motor if you remove
the freezer door first.
(See page 21.)
2. Remove the icemaker.
3 Remove the screws that hold
the plastic guide on the left
side of the freezer.
4. Remove the screw in the
access panel of the grille.
5. Remove two screws to take off
the fan bracket and motor as an
assembly.
6. Pull the fan blade off the shaft
and remove the motor from the
bracket.
ICE ROOM FAN
1. Remove the grille (steps 1–4 above).
2. Disconnect the wire harness from the grille.
3. Remove the fan assembly by removing two screws.
LFX21960ST/LFX25960xx Page 25 of 75 TRAINING MANUAL
To Next Page
Loading...
