Timer
– The self-timer allows
you to set a delay after the
shutter is pressed. Select
Off
,
3 seconds
,
5 seconds
, or
10
seconds
. This is ideal if you want
to be included in a photo.
Shot mode
– Selects various
shot modes.
Image quality
– Choose from
Super fine
,
Fine
, and
Normal
.
The finer the quality, the sharper
the photo. However, the file size
will increase as a result, which
means you’ll be able to store
fewer photos in the memory.
Auto review
– If you set Auto
review on, it will show you
the picture you just had taken
automatically.
Shutter sound
– Select one of
the four shutter sounds.
Tag location
– Activate to use
your phone’s location-based
services. Take pictures wherever
you are and tag them with the
location. If you upload tagged
pictures to a blog that supports
geotagging, you can see the
pictures displayed on a map.
NOTE:
This function is only
available when GPS is active.
Restore all camera default
settings.
Touch whenever you want
to know how this function
operates. This provides you
a quick guide.
TIP!
When you exit the
camera, all settings will return
to their defaults, except image
size and image quality. Any
nondefault settings must be
reset, such as colour tone.
Check these before you take
your next photo.
TIP!
The settings menu
is superimposed over the
viewfinder, so when you
change elements of the image
colour or quality, you will see a
preview of the image change
behind the settings menu.
LG-E720_SEA_E_1.0_110624.indd 43 2011.6.24 11:19:7 AM
To Next Page
Loading...
