Operating36
Operating
4
AUTO POWER On
This unit automatically turns on by an input source :
Bluetooth.
When you turn on your external device connected
to this unit, this unit recognizes the input signal and
select the suitable function. You can hear the sound
from your device.
If you try to connect your Bluetooth device, this unit
turns on and is paired automatically. And then play
your music.
y
After the unit is turned on by AUTO POWER
function, it will be automatically turned off if
there is no signal for a certain period of time
from the external device.
y
Depending on the connected device, this
function may not operate.
y
If you disconnect Bluetooth connection by
this unit, some Bluetooth devices try to
connect to the unit continually. Therefore it is
recommended to disconnect the connection
before turn off the unit.
y
If you want to use AUTO POWER, SIMPLINK
must be turned off. It takes for about 30
seconds to switch on or off SIMPLINK.
y
If you have already paired with this unit
automatically this unit can turn on by an
input.
y
If you turn off the unit by pressing the power
button for more than 5 seconds, Auto Power
On function is disabled. To activate it, turn on
the unit.
,
Note
To Next Page
Loading...
Need help?
General
