LG LHD687BG User Manual

Operating 35
Operating
4
LG Sound Sync
You can control some functions of this unit by
your TV’s remote control with LG Sound Sync. It is
compatible with the LG TV that is supported LG
Sound Sync. Make sure of the LG Sound Sync logo on
your TV.
Controllable function by LG TV’s remote control :
Volume up/down, mute
y
You can also use the remote control of this
unit while using LG Sound Sync. If you use TV's
remote control again, the unit synchronizes
with the TV.
According to TV Specications, the volume
and mute of this unit synchronize with TV.
y
When the connection fails, make sure of the
condition of the TV and power.
y
Make sure of the condition of this unit and
the connection in the cases below when using
LG Sound Sync.
- The unit is turned off.
- Changing the function to the others.
- Disconnecting the wireless connection
caused by interference or a distance.
y
Bluetooth connection is unavailable after
connecting LG TV.
y
Bluetooth and LG Sound Sync connection are
unavailable during recording.
,
Note
With wireless connection
1. Turn on the unit by pressing
1
(POWER).
2. Select LG TV function by using the
P
RADIO&INPUT.
3. Set up the sound output of TV to listen to the
sound through this unit :
"PAIRED" appears on the display window for
about 3 seconds and then you can see "LG TV"
on the display window if connecting normally
between this unit and your TV.
(Refer to the TV’s instruction manual for the
details of LG Sound Sync.)
If you turned off the unit directly by pressing
1
(POWER), LG Sound Sync (Wireless) will be
disconnected.
,
Note

LG LHD687BG Specifications

General

Brand	LG
Model	LHD687BG
Category	Home Theater System
Language	English