To Next Page

To Previous Page

Connecting 21

Connecting

OPTICAL IN connection

Connect an optical output of Unit (or Digital Device

etc) to the OPTICAL IN connector.

To the digital

optical output jack of

your component

Make sure to properly align and connect the

optical cable; improper alignment may cause

damage to the jack.

<O> <X>

Optical jack Optical cable Optical jack Optical cable

Caution

Home theater speaker ez setup

Listen to sound from TV, DVD and Digital Device with

5.1(2.1 or 2) ch mode. Even in power off mode, if you

press OPTICAL, then power is on and automatically

changed to AUX OPT mode.

1. Connect the unit’s OPTICAL IN jack to jack on

optical out of your TV (or Digital Device etc.).

2. Select the AUX OPT by using the OPTICAL on the

remote control to select the AUX OPT directly.

To select the AUX OPT function, press

RADIO&INPUT on the remote control.

3. Listen sound with 5.1(2.1 or 2)ch speaker.

4. To escape from AUX OPT by using the OPTICAL.

Function is retuned to previous one.

Antenna Connection

Connect the supplied FM antenna for listening to the

radio.

Connect the FM Wire antenna to the FM antenna

connector.

Be sure to fully extend the FM wire antenna.

Note

LG LHD70C User Manual

Questions and Answers: