R
Ronald BowmanSep 10, 2025
How to brighten the front panel display on my LG Receiver?
- EErnest ThompsonSep 10, 2025
To brighten a dim front panel display on your LG Receiver, press the DIMMER button on the Remote Control.
To Next PageTo Next PageHow to brighten the front panel display on my LG Receiver?
To brighten a dim front panel display on your LG Receiver, press the DIMMER button on the Remote Control.
What to do if the LG LHT799 Receiver remote control does not work?
If the remote control for your LG Receiver isn't working properly, try these steps: 1. Point the remote control at the remote sensor on the receiver. 2. Ensure you are within 23 ft (7 m) of the receiver. 3. Remove any obstacles between the remote and the receiver. 4. Replace the batteries in the remote with new ones.
How to fix no sound on LG Home Theater System?
If you're not getting any sound or the sound is very quiet from your LG Home Theater System, first, ensure that the equipment connected with the audio cable is set to the correct input mode for DVD audio. Check that the audio cables are securely connected. Make sure the connected equipment is turned on and if the audio connecting cable is damaged, replace it.
How to stop loud hum from LG Home Theater System?
To address loud hum or noise from your LG Home Theater System, start by cleaning the disc. Ensure the speakers and components are securely connected. If the DVD/CD Receiver is too close to the TV, move the TV away from the audio components.
How to troubleshoot no power on LG Home Theater System?
If your LG Home Theater System is not powering on, ensure the power cord is securely plugged into the wall outlet.
How to fix LG LHT799 Receiver when there is no power?
If your LG Receiver has no power, ensure the power cord is securely plugged into the wall outlet. This should restore power to the device.
How to adjust the brightness of the LG Home Theater System front panel display?
To brighten a dim front panel display on your LG Home Theater System, press the DIMMER button on the remote control.
What to do if the LG LHT799 audio CD indicator does not work?
If the power is on, but the DVD/CD Receiver audio CD indicator on your LG Receiver isn't working, it might be because no disc is inserted. Try inserting a disc.
Why is there no sound coming from my LG LHT799 Receiver?
If you are experiencing no sound or very low-level sound from your LG Receiver, check the following: * Ensure the equipment connected with the audio cable is set to receive the DVD audio signal output. * Verify that the audio cables are securely connected. * Make sure the equipment connected with the audio cable is turned on. * If the audio connecting cable is damaged, replace it with a new one.
Why can't I tune in radio stations on my LG LHT799?
If you are not able to tune in radio stations on your LG Receiver, try the following: * Connect the antenna securely. * Tune in the station manually, as the signal strength may be weak. * Preset the stations, as no stations may have been preset or preset stations may have been cleared.
General
