Why tape-to-tape editing is not possible on my LG DVD VCR Combo?
If tape-to-tape editing is not possible on your LG DVD VCR Combo, confirm that the camcorder is properly connected, as the clock or the timer may have been set incorrectly.
Why is there no sound from my LG LH-C360, or is the sound very low?
If you're experiencing sound issues with your LG Receiver, consider these potential causes: 1. The equipment connected with the audio cable is not set to receive DVD audio signal output: Select the correct input mode of the receiver. 2. The audio cables are not connected securely: Connect the audio cable into the jacks securely. 3. The power of the equipment connected with the audio cable is turned off: Turn on the equipment connected with the audio cable. 4. The audio connecting cable is damaged: Replace it with new one.
Why does the LG Receiver remote control not work properly?
The LG Receiver remote control might not be working for several reasons: * Ensure the remote is pointed directly at the remote sensor on the DVD/CD Receiver. * Make sure you are within 23 ft (7 m) of the DVD/CD Receiver. * Check for any obstacles between the remote and the receiver and remove them. * The batteries in the remote control might be dead; replace them with new ones.
How to fix LG LH-C360 when there is no sound?
If you are experiencing a lack of sound or very low sound levels with your LG Receiver, consider the following: * Ensure that the equipment connected with the audio cable is set to receive DVD audio signal output. * Check that the audio cables are securely connected. * Verify that the equipment connected to the audio cable is powered on. * The audio connecting cable may be damaged. If so, replace it.
What to do if my LG DVD VCR Combo has no power?
If your LG DVD VCR Combo has no power, the power cord might be disconnected. Ensure the power cord is securely plugged into the wall outlet.
How to brighten the front panel display on LG LH-C360?
To brighten the front panel display on your LG Receiver, press DIMMER on the remote control.
Why won't my LG LH-C360 DVD/CD player work even when power is on?
If the power is on but the LG DVD/CD Receiver isn't working, make sure a disc is inserted. Check that the DVD or audio CD indicator in the DVD display is lit.
Why radio stations cannot be tuned in with LG LH-C360?
If you are unable to tune into radio stations with your LG Receiver, consider the following: * Ensure the antenna is securely connected and properly positioned. * If the signal strength is weak, try tuning in the station manually. * Preset the stations.
What to do if nothing is displayed on the front panel of my LG LH-C360 Receiver?
If nothing is showing on the front panel display of your LG Receiver, press the DIMMER button on the remote control.
How to fix loud hum or noise heard from LG LH-C360?
If you're hearing a loud hum or noise from your LG Receiver, check these: 1. The disc is dirty: Clean the disc. 2. The speakers and components are connected poorly: Connect the speakers and components securely. 3. The DVD/CD Receiver is located too close to the TV: Move your TV away from the audio components.
To Next Page
General
