Audio Adjustment
Auxiliary Function
9
BEFORE OPERATION
Timer Function
The unit can set the clock function in power on/off state.
With the TIMER function you can have the radio
reception and recording, CD play, tape play or auxiliary
source play and recording turned on and off at the time
desired.
11
Press CLOCK to check the current time.
For your reference
If you don’t set clock, timer function doesn’t work.
22
Press TIMER to enter the timer setting mode.
TUNER-CD-TAPE flashes in the display window
in turn.
For your reference
If you want to correct the previous memorized TIMER
setting, press and hold the TIMER button more than 2
seconds.
- The previous memorized timer on time and TIMER
indicators appear in the display.
33
Press SET when the desired function is
blinking.
44
1. a. When you select the TUNER function,
“PLAY” and “REC” indicator blink in
the display window alternately for
about 3 seconds.
“PLAY” indicator : TUNER play only
“REC” indicator : TUNER play and
recording
b. Select the previous memorized preset
number with PRESET DOWN/UP button
or MULTI JOG and press SET.
- “ON TIME” indicator appears for about 0.5
seconds in the display window and then
disappears.
2. When you select the CD or TAPE function,
- “ON TIME” indicator appears for about 0.5
seconds in the display window and then
disappears.
55
Set the hour to switch on by pressing
PRESET DOWN/UP or turning MULTI JOG.
66
Press SET to confirm the hour to switch on.
77
Set the minute to switch on by pressing
PRESET DOWN/UP or turning MULTI JOG.
88
Press SET to confirm the minute to switch on.
“OFF TIME” indicator appears for about 0.5
seconds in the display window and then
disappears.
99
Set the hour to switch off by pressing
PRESET DOWN/UP or turning MULTI JOG.
1100
Press SET to confirm the hour to switch off.
1111
Set the minute to switch off by pressing
PRESET DOWN/UP or turning MULTI JOG.
1122
Press SET.
1133
Adjust the volume level by pressing
PRESET DOWN/UP or turning MULTI JOG .
1144
Press SET.
“”appears in the display window and the
timer setting has been completed.
1155
Switch the system off.
The selected function is automatically switched
on and off at the time set.
To cancel or check the timer
Each time the TIMER button is pressed you can select
the timer set or cancel. You can also check the timer
setting status.
To activate or check the timer, press the TIMER
button so that “ ” appears in the display window.
To cancel the TIMER, press the TIMER button so that
“”disappears in the display window.
11
Connect an auxiliary device i.e. TV or VCR to the
rear mounted AUX phone sockets.
22
Press AUX.
ote
You can also record from the auxiliary input source, see
Recording Section.